PPT Pump Stations

The space efficient PPT Series Pump Tank Station utilizes a vertical
dimension for water storage, and an integral pump platform deck to
minimize floor space footprint. The polyethylene reservoir is rust and
corrosive resistant and will not degrade. The PPT Series is designed
and engineered for round-the-clock operation with minimal services,
providing maximum return on investment.

Features:

Capacities From 450 to 3200 Gallons
Tower or Chilled Water Systems
Flows From 40 to 1250 GPM
Rotationally molded linear low-density polyethylene construction
One piece, seamless, cylidrical shape reservoir
Water-level Control
Pre-wired Magnetic Pump Motor Starters
Structural Steel Deck for Pump Mounting
Flexible Connections
System can be customized to meet any needs

The PPT Series Pump Tank Station is space efficient, utilizing and vertical dimension for water storage and an integral pump platform to its minimize floor space footprint.

High flow, high turbulent pumps offer maximum heat transfer across the process. A paten pending polyethylene reservoir is a seamless, one-piece design that resists rust, corrosion, and will not degrade.

Safety features include overload protection and thermostat control of the tower fan where necessary.

The centrifugal, motor driven pump has flexible connections, a bronze impeller, and suction/discharge service vale kits. The structural steel pump deck mounting is sturdy yet minimizes the floor space necessary for the unit.

All components are shipped loose and field assembled. All drawings are supplied for easy assembly.

Available options include; a standby pump and discharge manifold with isolation valves, and a pre-wired control cabinet for starters and controls.

PPT Series Pump Station shown w/ pumps, valves, and motor starter all mounted and wired.

PPT SERIES SPECIFICATIONS
		PPT-450	PPT-850	PPT-1600	PPT-3200
WATER CAPACITY (Gallons)	TO OVERFLOW	450	850	1600	3200
	TOWER DRAIN	225	425	800	1600
	CHILLED WATER	350	675	1200	2400
CONNECTIONS	WATER MAKE-UP	1"	1"	1"	1"
	TANK DRAIN	1-1/2"	1-1/2"	1-1/2"	1-1/2"
	TANK OVERFLOW	4"	4"	6"	6"
DIMENSIONS	HEIGHT	60"	72"	96"	96"
	WIDTH	48"	60"	72"	160"
	DEPTH	50"	62"	74"	74"
	DEPTH w/PUMP BASE	36"	36"	48"	48"
WEIGHT	DRY	860 lbs	1590 lbs	2243 lbs	4636 lbs
	OPERATING	2750 lbs	5160 lbs	8963 lbs	18076 lbs
	MAXIMUM	4640 lbs	8730 lbs	15683 lbs	31516 lbs
	SHIPPING	860 lbs	1590 lbs	2243 lbs	2636 lbs

P SERIES PUMP SPECIFICATIONS Process/Standby Pump Model
		PP-2	PP-3	PP-5	PP-7.5	PP-10	PP-15	PP-20	PP-25	PP-30	PP-40	PP-50	PP-60
PUMP	HP	2.0	3.0	5.0	7.5	10.0	15.0	20.0	25.0	30.0	40.0	50.0	60.0
PUMP	GPM/PSI	40/40	60/60	90/60	150/60	210/60	360/60	405/60	525/60	600/60	900/60	1000/60	1250/60
FULL LOAD AMPERAGE ¹	230/3/60	6.8	9.6	15.2	22.0	28.0	42.0	54.0	68.0	84.0	104.0	130.0	154.0
	460/3/60	3.4	4.8	7.6	11.0	14.0	21.0	27.0	34.0	42.0	52.0	65.0	77.0
	575/3/60	2.7	3.9	6.1	9.0	11.0	17.0	22.0	27.0	32.0	41.0	52.0	62.0

TP SERIES PUMP SPECIFICATIONS Tower/Evaporator Pump Model
		TP-2	TP-3	TP-5	TP-7.5	TP-10	TP-15	TP-20	TP-25	TP-30	TP-40
PUMP	HP	2.0	3.0	5.0	7.5	10.0	15.0	20.0	25.0	30.0	40.0
PUMP	GPM/PSI	60/30	90/30	210/30	255/30	405/30	525/30	810/30	900/30	1100/30	1750/30
FULL LOAD AMPERAGE ¹	230/3/60	6.8	9.6	15.2	22.0	28.0	42.0	54.0	68.0	84.0	104.0
	460/3/60	3.4	4.8	7.6	11.0	14.0	21.0	27.0	34.0	42.0	52.0
	575/3/60	2.7	3.9	6.1	9.0	11.0	17.0	22.0	27.0	32.0	41.0

¹ Full Load Amps shown. No allowance for in-rush. Full Amps are higher than Run Load Amps and must be used for sizing disconnects and supply wiring

Manufacturers of High-Quality
Products for the Plastics Molding Industry

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Fax: 800-482-4059 | E-mail: sales@servicesforplastics.com
Contact Webmaster regarding content or link problems
Copyright 2012. Services for Plastics, Inc. All Rights Reserved

QUALITY & SERVICE SINCE 1981