AC Voltage Sensor
Every maintenance person needs one! "Selected by the OSHA Electrical Technical Equipment Committee as the only instrument of its type for use by OSHA compliance officers to identify and cite electrical hazards of 50 volts or more." Probe tip glows bright red in the presence of AC voltage.

FAST - Locates voltage through insulated wire. No contact with conductor wire required
SAFE - All outer surfaces are non-conductive. No metallic contact
ACCURATE - Locates defective grounds, energized circuits, and induced voltage. Differentiates between live and neutral wires. Detects 50 - 600 volts AC
CONVENIENT - Small enough to fit in shirt pocket
UL LISTED - Tested and approved for public safety
Made in the U.S.A.

Packaging: Sold individually.

PART NO.	DESCRIPTION
ACS-3115	AC Voltage Sensor

Ceramic Caps
Heater band post terminal protectors

Available in three post terminal sizes: 10-24 Thd., 10-32 Thd., 1/4-20 Thd.

Packaging: Sold individually.

PART NO.	POST TERMINAL SIZE
CC-1024	10-24 Thd.
CC-1032	10-32 Thd.
CC-1420	14-20 Thd.

Coil Heaters
Highly-compacted coil maximizes heat transfer. Specifically designed to meet the demanding requirements of runnerless applications.

Hot metal forming punches and dies
Sealing bars and dies
Instrumentation
Medical applications
Hard-to-heat surfaces

Packaging: Sold individually.

PART NO.	REPLACES PART NO.	I.D.	LENGTH	VOLTS	WATTS	TYPE "J" TC
DEM REPLACEMENT HEATERS
FH10035	SSTC-31	1/2"	4-5/8"	120	300	YES
FH10033	SSTC-32	1/2"	4-5/8	240	300	YES
FH10036	SSTC-42	1/2"	2-1/2"	240	450	YES
FH10037	SSTC-62-90	1/2"	1-1/2"	240	250	YES
FH10038	SSTC-72-90	1/2"	2"	240	250	YES
FH10039	SSTC-314-2	3/4"	1-1/2"	240	325	NO
FH10040	SSTC-324-2	3/4"	2-1/2"	240	315	NO

Type "J" Thermocouple Accessories
We carry a full-line of Thermocouple/RTD accessories, leadwire, and terminations.

Standard Male Plugs	Standard Female Jacks	Mini Male Plugs	Mini Female Jacks
Cable Clamps	Mini Clamps	Std. Round Jack Panels

PART NO.	DESCRIPTION
TCPLUG	Standard Plug (Male)
TCPLUG-S	Solid Pin Plug (Male)
TCJACK	Standard Jack (Female)
TCCLAMP	Cable Clamp
TCMINIPLUG	Mini Plug (Male)
TCMINIJACK	Mini Jack (Female)
TCMINICLAMP	Mini Clamp
TCJACKPANEL	Standard Round Panel Jack

Type "J" Multi-circuit Jack Panels

Standard and custom designed panel sizes
Snap-in jack panels
Bezel face color coded nylon inserts
Designed for ease of installation and removal
Flexible retaining tabs secure panel
Accepts wire up to 14 AWG
Heavy duty spring loaded inserts to ensure positive plug connection
Accepts any standard size male thermocouple connector
Front numbering standard; custom lettering available
Available in 6, 12 or 18 circuits per row; 1,2,3 or 4 rows per panel
Temperature range: +400°F (204°C)
Miniature jack panels and Type K also available.

Thermocouple Adapters

For use with all standard immersion thermocouples
Made from nickel-plated steel (stainless steel also available)

THREAD: 1/8" -27 NPT
PART NO.	"L" LENGTH
TCA-78-18	7/8"
TCA-112-18	1-1/2"
TCA-212-18	2-1/2"

THREAD: 3/8" -24 NPT
PART NO.	"L" LENGTH
TCA-78-38	7/8"
TCA-112-38	1-1/2"
TCA-212-38	2-1/2"

Type "J" Insulated Thermocouple Wire

Maximum temperature: 900°F
Color code: Negative - red; Positive - white, brown overall jacket
Conductor types: solid and stranded
20 or 24 gauge
Fiberglass braid insulation

PART NO.	GAUGE	CONDUCTOR TYPE	INSULATION
PART NO.	GAUGE	CONDUCTOR TYPE	INDIVIDUAL CONDUCTOR	OVERALL JACKET
J20-1-304	20	Solid	Fiberglass Braid	Fiberglass Braid
J20-1-S-304	20	Solid	Fiberglass Braid	Fiberglass Braid w/SS Overbraid
J20-3-302	20	Stranded	Fiberglass Braid	Fiberglass Braid
J20-3-S-302	20	Stranded	Fiberglass Braid	Fiberglass Braid w/SS Overbraid
J20-1-S-315	20	Solid	Fiberglass Braid	Stainless Overbraid
J20-1-304	24	Solid	Fiberglass Braid	Fiberglass Braid

Type "J" Insulated Thermocouple Extension Wire

Maximum temperature: 221°F
Color code: Negative - red; Positive - white, black overall jacket
Conductor type: solid
16 or 20 gauge
PVC insulation

PART NO.	GAUGE	CONDUCTOR TYPE	INSULATION
PART NO.	GAUGE	CONDUCTOR TYPE	INDIVIDUAL CONDUCTOR	OVERALL JACKET
J16-5-510	16	Solid	PVC	PVC
J20-5-502	20	Solid	PVC	PVC

Hi-Temperature **Wire* for Heater Bands and Cartridge Heaters**

Type MG

Maximum temperature: 842°F/450°C
600 Volt
Nickel-plated copper wire
Wire size: 10 or 18 gauge
Maximum amps: From 31 to 100

Type TGGT

Maximum temperature: 482°F/250°C
600 Volt
Nickel-plated copper wire
Wire size: 10 or 18 gauge
Maximum amps: From 31 to 100

* Also available with all nickel conductor with stainless steel overbraid.

MG WIRE
PART NO.	WIRE SIZE	MAX USE AMPS
MG-18	18	31
MG-16	16	40
MG-14	14	55
MG-12	12	75
MG-10	10	100

TGGT WIRE
PART NO.	WIRE SIZE	MAX USE AMPS
TGGT-18	18	23
TGGT-16	16	29
TGGT-14	14	40
TGGT-12	12	55
TGGT-10	10	75

Manufacturers of High-Quality
Products for the Plastics Molding Industry

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Fax: 800-482-4059 | E-mail: sales@servicesforplastics.com
Contact Webmaster regarding content or link problems
Copyright 1997-2019 Services For Plastics, Inc. All rights reserved.

Type "J" Multi-circuit Jack Panels

Thermocouple Adapters

Type "J" Insulated Thermocouple Wire

Type "J" Insulated Thermocouple Extension Wire

Hi-Temperature Wire* for Heater Bands and Cartridge Heaters

Hi-Temperature **Wire* for Heater Bands and Cartridge Heaters**