|
Call Today 800-627-1033 |
|
|
|
|
||
 |
||
|
Call Today 800-627-1033 |
|
|
|
|
||
|
|
||
|
|
Selecting the right screw for your application can be a challenging and time consuming endeavor. The SFP Design Team makes it easy. Our Engineering and Design Teams have a combined 150+ years of hands-on experience in solving simple to complex molding problems. Although every molding project has unique variables, chances are that our engineers have solved similar issues in the past.
Whether you are looking to speed up cycle times, increase melt quality and consistency, achieve a more homogenous melt, or enhance material quality by reducing over shearing or long residence times, SFP can provide a custom design screw to solve even the most difficult problems.
Nothing is more important than getting it right the first time. That's why our Design Team will do whatever it takes to custom design the best screw, barrel, or complete injection unit to match your specific application. We take pride in the ability to make any screw. Our experienced Design Team is dedicated to providing exceptional design and technical support to keep your molding operations running efficiently. When you need assistance, we're here to make your job easier. Let us know your specific needs and we can custom design a screw to fit your specific application. For quicker response, use the quickQuote link below.
|
|
All Services for Plastics, Inc. custom design screws are manufactured from the highest-quality materials to withstand the stringent demands your operations require. Our screws represent the finest workmanship in the industry. Each custom designed screw is precisely manufactured to your specifications using the latest technology and quality inspected to ensure optimum performance. We inspect every screw for accurate gauging of all dimensions and evaluate the screw's appearance and performance requirements by performing quality checks to verify:
Need more information see the Feedscrew Section.
We can manufacture any screw from 1/2" (12mm) to 10" (254mm) OD up to 25' in length.
Our screws are available in a variety of tool steels to meet your specific requirements.
SFP guarantees our barrels and screws to be free of defective materials and workmanship for 90 days (industry standard).
We also offer extended life warranties on same materials.
In addition to Custom Design Barrels and Screws, we also offer Custom Design Screw Tip Assemblies, Nozzle Tips, End Caps, and Tie Bars. SFP provides all of the products you need to make your molding processes run efficiently and cost effectively. Click this link to view the complete SFP Product Index.
Battenfeld Molding Machines
Model No.
50/210, 300, 350, 500, 500/210, 750, 750/130, 750/350, 950, 1000/210, 1000/350, 1000/525, 1300/525, 1300/750, 1600/750, 1600/1000, 2100/1000, 2100/1330, 2700/1330, 2700/1900, 2700/2800, 3500/1330, 3500/1900, 3500/2800, 4500/1900, 4500/2800, 4500/4500, BA 200, BA 250/50 CDC, BA 400/125 CDC, BA 600/200 CDC, BA 800/315 CDC, BA 1000/315 CDC, CM 40, EcoPower 55, EcoPower 90, EcoPower 110, EcoPower 160, EcoPower 180, EcoPower 240, EcoPower 300, EcoPower Medical Series, MacroPower 400, MacroPower 450, MacroPower 500, MacroPower 550, MacroPower 650, MacroPower 700, MacroPower 850, MacroPower 900, MacroPower 1000, MacroPower 1100, MacroPower 1300, MacroPower 1500, MacroPower 1600, MacroPower 1800, MacroPower 2000, MacroPower E 400, MacroPower E 450, MacroPower E 500, MacroPower E 550, MacroPower E 650, MacroPower E 700, MacroPower E 850, MacroPower E 900, MacroPower E 1000, MacroPower E 1100, MacroPower E XL 450, MacroPower E XL 550, MacroPower E XL 700, MacroPower E XL 900, MacroPower MC 400, MacroPower MC 450, MacroPower MC 500, MacroPower MC 550, MacroPower MC 650, MacroPower MC 700, MacroPower MC 850, MacroPower MC 900, MacroPower MC 1000, MacroPower MC 1100, MacroPower MC 1300, MacroPower MC 1500, MacroPower MC 1600, MacroPower MC XL 450, MacroPower MC XL 550, MacroPower MC XL 700, MacroPower MC XL 900, MacroPower XL 450, MacroPower XL 550, MacroPower XL 700, MacroPower XL 900, MicroPower 5, MicroPower 15, SmartPower 25, SmartPower 35, SmartPower 50, SmartPower 60, SmartPower 80, SmartPower 90, SmartPower 110, SmartPower 120, SmartPower 160, SmartPower 180, SmartPower 210, SmartPower 240, SmartPower 300, SmartPower 350, SmartPower Combimould, TM180, TM240, TM300, TM400, TM500, TM Series 500/130, TM Xpress 160, TM Xpress 210, TM Xpress 270, TM Xpress 350, TM Xpress 450, VM 60, VM 80, VM 100, VM 150, VM 200, VM R 40, VM R 60, VM R 75, VM R 110, VM R 150, VM R 200, VM R 270
Bore Sizes
18mm Battenfeld Barrel, 22mm Battenfeld Barrel, 25mm Battenfeld Barrel, 28mm Battenfeld Barrel, 30mm Battenfeld Barrel, 35mm Battenfeld Barrel, 40mm Battenfeld Barrel, 45mm Battenfeld Barrel, 50mm Battenfeld Barrel, 55mm Battenfeld Barrel, 65mm Battenfeld Barrel, 75mm Battenfeld Barrel, 85mm Battenfeld Barrel, 100mm Battenfeld Barrel, 110mm Battenfeld Barrel, 120mm Battenfeld Barrel, 140mm Battenfeld Barrel
Injection Units
130, 210, 350, 525, 750, 1000, 1330, 1900, 2800
Custom Design Screws are available for use with the following materials.
| ABBR. | POLYMER |
| ABS | acrylonitrile-butadiene-styrene |
| ASA | acrylate-styrene-acrylonitrile |
| ATH | aluminum trihydrate |
| BDS | butadiene-styrene block copolymer |
| BMC | bulk molding compound |
| BOPP | biaxially oriented polypropylene |
| BR | butadiene rubber |
| CA | cellulose acetate |
| CAB | cellulose acetate-butyrate |
| CAP | cellulose acetate propionate |
| CE | cellulose |
| CMC | carboxymethyl cellulose |
| CN | cellulose nitrate |
| CP | cellulose propionate |
| CSM | chlorosulphonated polyethylene |
| DMC | dough molding compound |
| TPX | polymethyl pentene copolymer |
| UHMWPE | ultra high molecular weight PE |
| VCM | vinyl chloride monomer |
| ECTFE | ethylene chlorotrifluoro ethylene |
| EPDM | ethylene-propylene-diene monomer |
| EPM | ethylene-propylene rubber |
| EPR | ethylene-propylene rubber |
| ABBR. | POLYMER |
| EPS | expanded polystyrene |
| EVOH | ethylene vinyl acetate |
| FEP | fluorinated ethylene-propylene |
| FRP | fibre reinforced polyester/plastics |
| GMT | glass mat thermoplastic |
| GPPS | general purpose polystyrene |
| GRP | glass reinforced plastic |
| HDPE | high density polyethylene |
| HEMA | hydroxyethyl metharcylate polymer |
| HIPS | high impact polystyrene |
| LCP | liquid crystal polymer |
| LDPE | low density polyethylene |
| LLDPE | linear low density polyethylene |
| MBS | methacrylate-butadiene-styrene |
| MDPE | medium, density polyethylene |
| MF | melamine formaldehyde |
| NBR | acrylonitrile butadiene rubber |
| OPP | oriented polypropylene |
| PA | polyamide = nylon |
| PAA | polaryl amide |
| PA 6 | nylon 6 |
| PA 66 | nylon 66 |
| PA 46 | nylon 46 |
| ABBR. | POLYMER |
| PA610 | nylon 610 |
| PA66/610 | nylon 66/610 copolymer |
| PA11 | nylon 11 |
| PA12 | nylon 12 |
| PAI | polyamide imide |
| PAN | polyacrylonitrile |
| PB | polybutylene |
| PBT | polybutylene terephthalate |
| PC | polycarbonate |
| PE | polyethylene |
| PEBA | polyether block amide |
| PEEK | polyetheretherketone |
| PEEL | polyester elastomer |
| PEI | polyester imide |
| PEK | polyetherketone |
| PES | polyether sulphone |
| PETP | polyethylene terephthalate |
| PETG | PET copolymer |
| PF | phenol formaldehyde |
| PFA | perfluoro alkocyl alkane |
| PHB | polyhydroxbutyrate |
| PI | polyimide |
| PIR | polyisocyanurate rigid (foam) |
| ABBR. | POLYMER |
| PMMA | polymethyl methacrylate |
| PMP | polymethyl pentene |
| POM | polyoxymethylene |
| PP | polypropylene |
| PPE | polypropylene ether |
| PPO | polypropylene sulphide |
| PPSS | polypropylene sulphide sulphone |
| PS | polystyrene |
| PSU | polysulphone |
| PTFE | polytetrafluoroethylene |
| PTMT | polytetramethylene terephthalate |
| PUR | polyurethane |
| PVA | polyvinyl acetate |
| PVB | polyvinyl butytral |
| PVC | polyvinyl chloride |
| PVCC | chlorinated polyvinyl chloride |
| PVCP | polyvinyl chloride plasticized |
| PVCU | polyvinyl chloride unplasticized |
| PVDC | polyvinylidene chloride |
| ABBR. | POLYMER |
| PVDF | polyvinylidene fluoride |
| PVF | polyvinylfluoride |
| PVOH | polyvinyl alcohol |
| SAN | styrene acrylonitrile |
| SRB | styrene-butadiene-styrene |
| SEBS | styrene-ethylene-butadiene-styrene |
| SIS | styrene-isoprene-styrene |
| SMA | styrene maleic anhyride |
| SMC | sheet molding compound |
| SRP | self reinforcing polymer |
| TPE | thermoplastic elastomer |
| TPO | thermoplastic olefin |
| TPR | thermoplastic rubber |
| TPS | toughened polystyrene |
| TPU | thermoplastic polyurethane (rubber) |
| TPUR | thermoplastic polyurethane (rubber) |
| UF | urea formaldehyde |
| VC | vinyl chloride |
| XLPE | cross-linked polyethylene |
Home | Request a Quote | Product Index | Online Catalog |
Barrels & Screws | Electrical Products | Hoses & Fittings |
Molding Accessories | SDS Sheets | Credit Application | Terms & Conditions | About Us | Contact Us
7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
E-mail: Sales@ServicesForPlastics.com
Contact Webmaster regarding content or link problems
Copyright 1997-2025 | Services For Plastics, Inc. | All rights reserved. | Privacy Policy
