PLASTIC SERVICES
& EQUIPMENT

Home  |  Products   |  Brands  |  Place An Order  |  Request A Quote  | Promotions  |  Site Map  |  Contact Us

 


E/Z Purge® Premium 
Purging Liquid



E/Z Purge® Purging Liquids

This product has been discontinued. Please see our substitute purging products, here. Thank you


 

E/Z Purge® is an ammonia-free, water-based product that removes and cleans unwanted color, material or burned polymer from extruders, injection or blow molding equipment. Purging is a critical part of routine maintenance but costly in terms of system down time, wasted materials and labor costs. The efficient cleaning and purging action of E/Z Purge® enables you to make quick, complete changeovers from one color to another, and from one resin type to another. Down time is reduced because there is no need to strip down and manually clean deposits from melt passages. E/Z Purge® easily mixes with your own scrap resin to produce unsurpassed purging performance, eliminating the need to purchase more costly resin pellets for purging.

  • Water soluble -  Safe on ALL hot runner manifolds and material types
  • Available in 3 levels: Standard, Heavy Duty and Super Duty
  • No odors, Ammonia-free
  • Leave in barrel as long as you want with no corrosive reaction
  • Non-abrasive cleaning
  • Using scrap material with E/Z Purge® is much less expensive than harsh purging chemicals
  • Non-toxic, non-flammable
  • Meets all safety requirements -- no hazardous chemicals

Now available in 3 levels for more aggressive cleaning capabilities:

Standard Duty 
A quick, economical method to clean injection and blow molding machines and film and sheet extruders which are of a clean, smooth design with minimal changes of resin and routine, frequent cleaning. Works well with PE and PP.

Heavy Duty 
Use where mold designs are more complicated, product runs are longer, color and resin changes more frequent. Works well with PP, PE, Nylon and Polyester. Mix with scrap or cast acrylic for a more aggressive purge.

Super Duty 
Use where mold designs are more complicated, product runs are shorter, color and resin changes more frequent. Works well with more rigid materials, PVC, Nylon and Polycarbonate and especially with molds prone to produce burnt polymer. Mix with scrap or cast acrylic for a more aggressive purge.

Packaging:  Sold in 1 qt. bottles or 5 gallon pails.


DESCRIPTION PART
NO.
SIZE
Standard Duty EZP-1 1 qt.
EZP-1-5   5 gal.
Heavy Duty EZP-1HD 1 qt.
EZP-1HD-5   5 gal.
Super Heavy Duty EZP-1S 1 qt.
EZP-1S-5   5 gal.

 

Our purging compound is comparable with the following brands: Asaclean, Bamberger, Cleanplast, Eko, Gator Purge, Grange, Lakos, Neutrex, Vovachem, PTS, Purge-USA, Rapid Purge, RBM, Slide, Spartech, Untrapurge, XPD8. 


Your Next Barrel or Screw Is On Our Shelf...
Call Today! 800-627-1033

Home | Request A Quote | Place An Order | Product Index 
Barrels & Screws | Electrical Products | Hose & Fittings | Molding Accessories 
About PS&E
| Terms & Conditions | Credit Application
Contact Us | Request A Catalog | Online Catalog


PLASTIC SERVICES & EQUIPMENT


Fax:  800-482-4059
| E-mail:  sales@servicesforplastics.com | Address:  7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems.
Copyright 1997-2024 | Plastic Services & Equipment. | All rights reserved. | Privacy Policy